Best ways to remove car seats for deep cleaning

Cleaning between car seats is time-consuming. However, it can be easier if the car seats are removed properly. Removing car seats is an important step in deep cleaning a car. This allows you to clean the crevices and nooks difficult to reach when the seats are in place.

It is common for dust and pet hair to build upon car seats. Beginners may spend a lot of time trying to clean up every crumb, yet still asking questions on How to remove car seats for cleaning. Even though you can clean your car by doing this, small dust particles and debris will remain. If you want to clean your car carpets effectively, you need to remove the seats. You don’t want to climb into a car with dirt and hair all over it.

Why is it important to remove the car seat?

When you first purchased your car, the seats probably looked spotless. How quickly things change with children! They spill everything on them, and they pick up mud and dirt that gets into every nook and cranny, especially on the cracked dashboard that seems to be everywhere these days.

The car seats don’t need to be removed, but it will make accessing crevices much easier and create more space to work. Additionally, you can wash the carpet if you wish to take the car seats out.

back to menu ↑

How to remove car seats for cleaning

How to remove car seats for cleaning

Remove the bolts

There are some bolts with plastic molding attached by a screw. If there is no screw, it can be removed using a standard screwdriver. Slide the seat forward to reveal the front bolts. Remove the rear bolts by moving the seat forward. Store the bolts in zip-lock plastic bags.

In older cars, the seats are often bolted to the floor; in newer models, they are bolted to mounting brackets.

Adjust the seat back and forward

Carefully tilt the seat back or forward to expose any wires connected to the underside of the seat after you have removed all four bolts.

How to remove car seats for cleaning

Taking The Negative (-) Battery Cable Off The Car

Disconnecting the negative cable from the battery is crucial to preventing an airbag from inflating.

Negative (-) cables are always black. Avoid making mistakes this way.

Removing the seatbelt (optional)

Seatbelts are now removable from each seat. This step is optional. In some cars, it is difficult to remove the seatbelts.

Get the seats out

How to remove car seats for cleaning

You can take out both front seats now that you’ve completed all the steps with them.

Because of the seat rails, be very gentle when removing seats. They are prone to scratching the car.

Reinstalling the car seats

Once the seats and carpets have been removed (or whatever else you need to do), install the seats.

In reverse order, reinstall the seats. Ensure that the car battery is not connected until all jacks are connected.

Removing the backseat

Different car models have different ways of removing the backseat. There may be a small lever underneath the front seat that allows you to open it. You can remove others by grasping the bottom of the seat and pulling it out. In some models, the seat belt receivers are attached to a handle at the center of the seat. Additionally, seat bottoms near the footwells have screws on the lower edges.

back to menu ↑

Cleaning between the front car seats and dashboard

How to remove car seats for cleaning

There is no doubt that cleaning between the car seats and dashboard is challenging due to their closeness. Having the right tools and removing the seats will make the job much easier.

Tools and equipment required

  • Vacuum cleaner
  • Crevice Tool
  • Pair of Microfiber Cloth
  • Detailing Brush for Interiors
  • Steam Cleaner (Recommended)
  • Trash bin

1: Pick up the trash

Ensure that no goods are stored between the seats and the console. You will usually find free air fresheners, crumbs, receipts, and change in this area.

2: Use a vacuum

Once you’ve moved the junk, use a vacuum and crevice tool to clean the center console. Make sure that you vacuum both sides of the seat and the center console.

3: Take the time to clean these areas

By vacuuming these areas thoroughly, you’ll have a clean dashboard and seats.

Clean these areas further for a more detailed interior. A detail brush, air compressor, and steam cleaner are all necessary.

back to menu ↑

Cleaning the back seats

How to remove car seats for cleaning

Back seats are easier to clean than the area between the front seats and the car’s dashboard. You can remove the back seats much more easily if you want them completely cleaned out.

Many modern family-friendly cars allow you to remove their back seats without any tools. If you don’t want to remove the back seats, you should clean them the same way you did the seat folds.

Tools and equipment required

  • Vacuum
  • Crevice tool
  • Detailing brush
  • Upholstery cleaner

1: Start with a vacuum

Hover the vacuum over the back seats of the car to clean them. You can easily collect all of the dirt and debris this way.

2: Clean the tight places

Getting into crevices and tight spots will require a crevice tool. Push the crevice tool gently down the sides, in the middle, and once more at the back and bottom.

3: Clean the upholstery with a detailing brush and upholstery cleaner

Take a detailing brush and upholstery cleaner after completing the previous steps. Cleaning the seat requires mixing the cleaner and stubborn dirt according to the instructions.

  1. […] Also, read our article about “How to remove car seats for deep cleaning.” […]

  2. […] out our article on removing car seats for more […]

Leave a reply